Mail us: info@steelcoilsteelplates.com

416HT stainless steel

SS 416HT Sheet for Sale

Chemical Composition (%) of 416HT Stainless Steel Plate

C Mn Si P S Cr
0.15 1.25 1.00 0.06 0.15 12.0-14.0

Mechanical Properties of 416HT Stainless Steel Plate

Tempering Temperature (°C) Tensile Strength (MPa) Yield Strength
0.2% Proof (MPa)
Elongation
(% in 50mm)
Hardness Brinell
(HB)
Impact Charpy V (J)
Annealed * 517 276 30 262
Condition T ** 758 586 18 248-302
204 1340 1050 11 388 20
316 1350 1060 12 388 22
427 1405 1110 11 401 #
538 1000 795 13 321 #
593 840 705 19 248 27
650 750 575 20 223 38
* Annealed properties are typical for Condition A of ASTM A582.
** Hardened and tempered Condition T of ASTM A582 – Brinell Hardness is specified range, other properties are typical only.
# Due to associated low impact resistance this steel should not be tempered in the range 400-

Physical Properties of 416HT Stainless Steel Plate

Density
kg /m3
Thermal Conductivity
W/mK
Electrical
Resistivity
(Microhm/cm)
Modulus of
Elasticity
Coefficient of
Thermal Expansion
µm/m/°C
Specific Heat
(J/kg.K)
Specific Gravity
7750 24.9at 212°F 43 at 68°F 200 GPa 9.9 at 32 – 212°F 460 at 32°F to 212°F 7.7

Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels. It has much better machining properties than the austenitic grades, but lower corrosion resistance.It has the highest machinability of any stainless steel at about 85% of that of a free-machining carbon steel. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant.

Although Alloy 416HT and other martensitic stainless steels are not as resistant as austenitic or ferritic stainless, it still demonstrates good corrosion and oxidation resistance plus high strength in the hardened and tempered condition. Alloy 416HT  is easily machined, is always magnetic, and has low frictional properties that reduce galling and seizing.

If you are interested in other Stainless Steel Plates/Sheets, please click 302, 303, 304, 304L, 304H, 309, 309S, 310, 310S, 310H, 316, 316L, 317/317L, 317LMN, 321, 321H, 330, 347, 347H, 904L, 403, 405, 409, 410, 410S, 410/HT, 416, 416HT, 420, 422, 430, 440C, Duplex 2205, Duplex 2304, Duplex 2507.

Get In touch with

Leave a Reply

Your email address will not be published. Required fields are marked *

Free Worldwide shipping

On all orders above $50

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered in the country of usage

100% Secure Checkout

PayPal / MasterCard / Visa